M

-

Standard metric input and output shafts (diameter/bore, length, key, keyway)

E

-

Optional inch input and output shafts (diameter/bore, length, key, keyway)

Initially 1000 Series

110, 120, ….250 - Based on 15 Sizes

D - Drive One Designation

H  - Parallel, Horizontal L.S. Shaft, Universal Housing

B  - Right Angle, Horizontal L.S. Shaft (Input & Output Shafts in same plane),

      Universal Housing

G - Parallel, Horizontal L.S. Shaft, Horizontally Split Housing

R - Right Angle, Horizontal L.S. Shaft (Input & Output Shafts in same plane),

      Horizontally Split Housing

Z  - Right Angle, Horizontal L.S. Shaft (Input & Output Shafts not in same plane)

V  - Parallel, Vertical L.S. Shaft

X  - Right Angle, Vertical L.S. Shaft (Input & Output Shafts in same plane)

C - Solid shaft (Cylindrical OD) -  Sizes 1130-1190

T - Hollow shaft (Tapered ID) - Sizes 1130-1190 

Q - Hollow shaft, straight bored & keyed, with keeper plate - Sizes 1130-1190

J - Hollow shaft, keyless, with shrink disc - Sizes 1130-1190

A - Solid shaft with oversize OD and increased bearing span (Agitator design) -

Sizes 1150-1190

M - Hollow shaft, straight bored and keyed with keeper plate, with increased

bearing span (Mixer design) - Sizes 1150-1190

P - Planetary Secondary, Hollow LS Shaft with Shrink Disc

R - Planetary Secondary, Solid LS Shaft, For Flange Mounting

B - Planetary Secondary, Solid LS Shaft, For Foot Mounting

F - Planetary Secondary, Solid LS Shaft, Moment Connection

R - Planetary Secondary, Solid LS Shaft, For Flange Mounting

B - Planetary Secondary, Solid LS Shaft, For Foot Mounting

F - Planetary Secondary, Solid LS Shaft, Moment Connection

Number of reductions /  stages in gear drive

Initial Model A.  Subsequent models B,C,D.

N - Having no special features or housing rework

R - Having housing reworked for standard option (e.g. backstop, cooling tubes, etc.

S - Having special feature or features

.

Exact ratio expressed as (5) characters including decimal point

Examples:  1.321, 14.95, 155.7, 1196.

T - Horizontal output - 12 o'clock position (HSS over LSS)

R - Horizontal output - 3 o'clock position (HSS to right of LSS)

B - Horizontal output - 6 o'clock position (HSS under LSS)

L - Horizontal output - 9 o'clock position (HSS to left of LSS)

D - Vertical output – LSS down

U - Vertical output – LSS up

A,B,C,D,E,F - Mounted via A,B,C,D,E,F housing face (see housing faces)

J - Shaft Mounted Drive (Parallel shaft)

H - Alignment Free Drive (Right angle shaft)

See Assembly figures